The Z230SFF has 3 x DisplayPorts at the rear of the system on the motherboard (Item #4 in the picture below). I am assuming that you have connected the second monitor to the DisplayPort of the K600 card, and not the DisplayPorts on the motherboard. They don't show up in the report just because they don't have anything connected that's all. PA is displaying the details of only connected devices, and hence the number 2. Would this be why the display ports are not being recognised ? The SATA details attached suggest a maximum of two supported devices, see the red annotation, this would be the c drive and dvd reader. The first two are clickable, as you have the DVD drive and the HDD connected to them. They are not clickable since you don't have anything connected to them. The other two beoing the C and DVD drive." "All entries respond to a right and left click.Įxcept for the three entries at the bottom right, below Sata 3.0, I presume these are the three display ports. The other possibility is a faulty DP-DVI convertor. Since you are not getting ANY display on the DisplayPort, you might want to check the graphics card for a faulty port. Considering your monitor is a 24" monitor, you don't need Dual Link DVI adaptor.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |